The tools listed below are recommendations and may vary based on the type of wall panels you are installing. Some panels can be cut with a simple box cutter, while others may require a drill or handsaw. Choose the tools that best suit your project and preference.

Step 1: Prepare Your Wall

• Clean the surface to remove dust and debris.
• Ensure the wall is dry and smooth for the best adhesion.
• If necessary, sand down any rough patches.

Step 2: Measure & Plan

• Measure your wall dimensions and mark guidelines for precise placement.
• Plan your panel layout to avoid unnecessary cuts.

Step 3: Cutting the Panels

• Use an oscillating tool or handsaw to trim panels to size.
• Smooth edges with sandpaper to prevent splintering.

Step 4: Apply Adhesive & Position Panels

• Apply Loctite Power Grab adhesive in even strips on the back of the panel.
• Use Gorilla Hot Glue in small dabs for an instant hold while the adhesive sets.
• Press the panel firmly against the wall, ensuring proper alignment.

Step 5: Secure Panels

• Use a drill and nails for added support, especially on uneven surfaces.
• If necessary, reinforce edges with additional adhesive.

Step 6: Finishing Touches

• Check for any gaps and fill them with adhesive or caulk.
• Lightly sand any rough edges for a seamless look.
• Allow the adhesive to fully cure before applying any paint or finish.

• Start from a corner and work your way across for a uniform look.
• Use a level to keep panels straight during installation.
• Let the adhesive set for at least 24 hours before applying additional decor or pressure.

By following these steps, you’ll achieve a professional-grade installation with ease. Enjoy your newly transformed space!